Table of Contents
Nissan Qashqai models represent everything you might want in a car: they are good-looking, offer great visibility, and come with enough storage space. But despite the advantages, the model comes with a few issues, just like any other car. One of them is that the Nissan Qashqai won’t go into gear.
Most of the time, your Nissan Qashqai not going into gear comes as a result of malfunctioning or damaged gears, faulty hub sleeves, malfunctioning or damaged synchronizer rings, or issues with the clutch system. Low transmission fluid is also a common problem that prevents the car from going into gear.
Since gear is so important for the vehicle’s power, you have to investigate the issue and discover the cause so you can find a solution or get a mechanic to help you. Luckily, this article will tell you some potential problems with your Nissan Qashqai’s gear.
Top 6 Reasons Why Your Nissan Qashqai Won’t Go Into Gear
Despite the vehicle’s pros, many things could cause a Nissan Qashqai to not go into gear. These could be a low transmission fluid level, a stubborn clutch, a faulty synchronizer ring, and many others. We’ll talk about each issue in particular and offer you the best solutions.
Low Transmission Fluid Level
Problem: Not having enough transmission fluid is one of the main reasons why vehicles like Nissan Qashqai won’t go into gear. All transmissions require different types of fluid in order to run, whether they are automatic or manual. When the fluid level gets low, the car will not allow you to switch gears.
What makes this even worse is the fact that it can end up damaging the transmission. As such, you will have to spend a lot of money on reparations or even a transmission system replacement. The transmission fluid will lubricate the mobbing parts of the car, so you must always ensure there is enough of it.
If you constantly maintain the car yet there is not enough fluid, the chances are that there may be a leak somewhere.
Solution: Check the transmission fluid level and make sure there is enough. If there isn’t, add more. Make sure it isn’t leaking from anywhere, and if you find a leak, fix it so your car doesn’t lose fluid.
Problem: The clutch may refuse to disengage, and this may be another reason why your vehicle won’t go into gear.
A clutch connects the wheels to the engine, making the vehicle work. When you use your foot to press the clutch, it can disconnect the engine.
A clutch has multiple parts. The pedal is the one that connects to a hydraulic system that features a slave cylinder and a master cylinder. The former is linked to a clutch form that is connected to the pressure plates and the clutch.
Some clutches are also operated by cables, and sometimes, the cable may break. When a pedal can go to the floor but will not engage the clutch, the chances are that the cable is broken.
In case one of these parts is malfunctioning or is broken, the Nissan Qashqai will be unable to go into gear.
Solution: Test the clutch in a vacant place so you do not put anyone else at risk. After engaging the gear and the clutch, start the car. If the car ends up stumbling forward, make sure to take it to a servicing shop. Ideally, you should get the car inspected by a mechanic so they find the right issue and help you make replacements or reparations.
Low Master Cylinder Fluid Level
Problem: Not having enough fluid in the clutch master cylinder may be another reason why your Nissan Qashqai won’t go into gear. This is possible if you are driving a stick shift with a hydraulic clutch. More often than not, the lack of fluid is caused by a leak in the system. If there is any fluid on your clutch pedal, then this is a sign of a leak.
Solution: Fix the leak if there is any and add brake fluid to the clutch master cylinder. If you cannot fix the leak by yourself, you should reach out to professionals.
Faulty Hub Sleeve
Problem: Hub sleeves are responsible for engaging the gear. If they do not move freely, then shifting gears can be very difficult.
Solution: Replace your hub sleeve.
Faulty Synchronizer Ring
Problem: A synchronizer ring from the Nissan Qashqai’s gearbox helps change gears. But when one of the teeth is malfunctioning or damaged, it will make it very difficult to switch gears.
Solution: If this happens, you should consider replacing the synchronizer ring.
Problem: You may be able to shift out of a certain gear, but then try to shift into the next one and you hear a grinding noise. This could point to the fact that the sequencers have already failed or are failing.
Solution: If this is the issue, you should be able to shift to the following highest gear.
A Nissan Qashqai not going into gear can be a huge and frustrating issue, especially if you need the car on a daily basis. If you diagnose the issue accurately, you can fix the issue or make the proper replacements, resulting in your car being functional again. Don’t hesitate to reach out to a mechanic for help if you don’t know how to handle everything by yourself.
What are the signs that there are issues with a Nissan gearbox?
Most of the time, a malfunctioning gearbox will show some signs such as worn gear teeth, worn bearings, dragging clutch, grinding noises while shifting the transmission, and leaky transmission fluid.
How much does it cost to replace a Nissan Qashqai gearbox?
If your Nissan Qashqai’s gearbox needs replacement, expect to pay around $1,000 or more. You will also have to handle the labor/installation costs on top of that.