In terms of reliable trucks, you can hardly go wrong with the Nissan Navara. Being one of the flagship vehicles from the Nissan brand, it has stood the test of time in terms of quality and functionality. However, nothing can be as demoralizing as dealing with a Nissan Navara D40 not starting when you are in a hurry.

There are two main reasons that your Nissan Navara won’t start. The first common reason is that it does not turn when you turn the key. This simply means that the engine does not move when you turn the key. The other main reason is the engine turns, but does not fire and run on its own. Both of these issues can be diagnosed at home.

Since the Nissan Navara D40 is not a vehicle you commonly struggle with when it comes to reliability, it is frustrating when you have to deal with such an issue. To help you better understand why the Nissan Navara D40 will not start, we have created this article. It should make it easier to help you diagnose and fix the issue.

5 Common Reasons Your Nissan Navara D40 Is Not Starting

No matter which vehicle you own, dealing with something that does not start can be very frustrating. It can put you in a bad situation, and you might need some assistance getting your vehicle home. If you are one of the unfortunate victims dealing with a Nissan Navara D40 not starting, the following reasons might be the cause:

1. Defective Starter

Problem: The most common reason your Nissan Navara might not be starting is a defective starter. The starter can often give in without giving you much warning. However, the issue is most commonly reported in some older vehicles. Once the starter goes, it is near impossible to start the vehicle, unless you have a manual, which means you can pop start it.

Solution: The solution is straightforward, and you will need to replace the starter on the vehicle. Fortunately, you can find all the parts and do this at home. Taking the vehicle to your dealership might be very expensive. You might also need to pay for the labor, setting you back a couple of hundred bucks.

2. Battery Issues

Problem: A more common issue many people encounter is battery issues. However, the battery issues can be broken up into two parts. First, you might have a corroded battery cable. If the battery does not clearly connect to the poles, you won’t have any charge coming through to start the engine.

The second issue can be when you have an older battery that does not have enough charge to turn the starter. As mentioned, the issue is commonly found in older vehicles and you will find that your cranking amps will decrease as the battery ages. It might have a slow cranking noise, but the vehicle will not start.

Keep in mind that a bad alternator can also be the root cause that causes your Nissan Navara not to hold enough charge in the battery.

Solution: It is best to consider both issues, and you should start by checking that the battery cable is not corroded and makes an unobstructed connection to the poles. If this is cleared, you will need a multimeter to measure the charge in your battery. A fully charged car battery should be around 12.6-volts, but if the vehicle is running, it could be as high as 14.7-volts. If it does not hold enough charge, you will need to replace the battery.

3. Bad Fuel Pump/Filter

Problem: Your vehicle will need a certain amount of fuel that needs to reach the combustion chamber for your Nissan Navara to crank. If you have a bad fuel pump or fuel filter, you might not be able to have the vehicle pump enough fuel to the combustion chamber. Keep in mind that most fuel pump and injector issues are similar on Nissan models

Solution: You might want to remove the fuel pump and fuel filter and check if there are any blockages or leaks that keep the vehicle from pumping enough fuel. If you have basic mechanic skills, you should be able to do this comfortably at home.

4. Timing Of The Engine

Problem: Your vehicle is programmed to fire the spark plugs at the right time to create a light that turns on the vehicle. If your spark plug is damaged or if the timing is off and the plugs do not fire at the correct time, it will no longer be in sync with the crankshaft to crank your vehicle, and your car will not start.

Solution: Your heads-up display will usually indicate one of the OBDII codes associated with timing issues. However, P0013 is often the most common code related to the camshaft positioning. Since this can come from various issues, visiting your dealership is a good choice to ensure everything is working. Since the issue is common with the Nissan Models, you might need to deal with it on your Nissan Versa.

5. Ignition Issues

Problem: We have left one of the most prominent issues for last, and you will find that having ignition issues could often lead to your engine stopping. If your ignition does not fire to create a spark, your vehicle will not start, often indicated by standard codes like P0300 or P0301. It could also be related to misfiring.

Solution: Once again, there are various reasons that could be the root cause for ignition issues, and one of these can be bad spark plugs, bad plug wires, or even computer issues. It is best to visit your dealership and have them diagnose the problem.

FAQ

Why Does My Nissan Navara Start For A Few Seconds Then Dies?

One of the main reasons for a Nissan Navara starting for a few seconds and then stopping is related to the fuel pump. You could be dealing with a clogged fuel pump or a bad fuel filter. Alternatively, an air leak in the fuel pump could create an airlock in the fuel line.

Why Doesn’t My New Nissan Navara Start?

It is uncommon for these issues to have any bearing on brand new Nissan Navaras. However, if you are dealing with a new Nissan Navara not starting, it could be the security features. Many new vehicles have built-in electronic protection to make it harder for thieves to steal the car. You might notice a security notification if this is the cause.