Table of Contents
Recommended products regarding the topic “Push Button”
We have compared products in the section “Push Button”. Here you can find the top 15 in the category “Push Button”.
Push Button – the most important at a glance
A push button is a mechanical switch that controls an aspect of a machine or process. It operates by pressing or releasing a button to start, halt or change the operation mode of the machine. Types of push buttons can be categorized into: Momentary push buttons, which only remain active as long as they’re being pressed and stops once the pressure is removed; and Latching or maintained push buttons, which remain active until they’re pressed again. Variations in design and colors are available for different operational settings such as red for stop, green for go, and yellow for caution. There can be differences in mounting style too, with some requiring panel cutouts for installation and others capable of mounting directly onto surfaces. To choose the right push button, it’s important to consider its intended use, the environment where it will be used, and compatibility with existing systems or machinery.
Bestsellers in “Push Button”
A list of bestsellers under the category “Push Button” you can find here. Here you can see which products other users have bought especially often.
- Package contains 12pcs 7mm Prewired momentary mini push button,6 colours (red, yellow, blue, green, black, white),each colour 2pcs.
- Operation Type: Momentary; Contact Type: SPST; Rating Voltage: 3V-6V-12V-24V-230V/ 1A; 2 Pin, Nomal Open NO/NC.
- Momentary ON/OFF button (button is "on" only when the button is held down).
- Easy Installation: Pre-wired design,Nice soldering,easy to install,save your time to connect wire to the switches.
- The push button is used in industrial controlling circuits for controlling in electromagnetic starter, Contactor, Relay, electrified railway and power grid wire insulation protection.
- Mounting Hole Size:16mm , Voltage: 36V AC.
- Self-reset/Momentary Switch: Push & Hold-ON; Release-OFF.
- Aluminum Shell Material, 100% brand new and high quality, waterproof design, can be used in wet or dusty environment.
- Universal: This push button switch is suitable for almost any power starting devices, motorized vehicle of motor starting and can also be an access control button.
- Easy Installation: screw-type terminals, don’t need solder.
- [Momentary Switch] Automatic reset, energised when the button is pressed and de-energised when the button is released. Non-locking round switch is made of high quality plastic, sturdy and wear-resistant. Equipped with sturdy spring, it can flexibly spring back every time you use it.
- [Easy to install] It is widely used as neon lights, led light switches, car horns, ignition switches, doorbells, home appliances buttons, and automotive technical equipment projects.
- [Mounting hole size] Opening size 16mm/0.63inch; Maximum switching capacity: 3A/250VAC; Terminal type: screw; Material: stainless steel, plastic, electrical parts.
- [Stable performance] High-quality, durable, reliable, shock-resistant, up to 500,000 cycles. It is easy to clean and maintain, and has a long service life.
- Momentary pushbutton switch can be used for car modification parts replacement or arcade game parts replacement: momentary pushbutton switch can be used for circuit control in electromagnetic starters, contactors, relays and other circuits.
- Action Type: Momentary
- Poles: SPST
- Rating Voltage: AC 250V/ 1A
- Terminals: 2 Pins
- Diameter of Thread: 6.9mm/ 0.27in; Diameter of Cap: 6mm/ 0.24in; Pin Pitch: 3mm/ 0.11in
- Momentary Type: Push and Hold - ON, Release - OFF;Pre-wired design:Easy to install, and saves unnecessary cost
- Mounting Cut Hole: 12mm;Head diameter: 17.5mm
- Switch rating: 3A/125V AC;Contact resistance: 20MΩ
- Colors include: Black;Welding line length: 110mm/4"
- Package Includes:6× Black Reset Switch Push Button
- ✔Push button momentary switch Includes Black Neoprene Cap for Extra Protection Against Dirt and Moisture.
- ✔Horn push button starter switch are made of high quality,weatherproof rubber cover, prevents dirt, dust and moisture from getting in.
- ✔Car horn button switch Length is 2.44 inch,width is 1.1 inch engine starter switch mount in 5/8 inch drill hole and 0.63 inch threaded parts.
- ✔Push start button apply to most 12 volt vehicles with 20A current,its normally open (off) position when you release the button,shown by the brackets around ON.It's the standard horn/ignition type switch.
- ✔Push button starter switch includes Flush Terminal Screws.Strict quality control and full inspection are taken before shipment to assure you for top quality push switch.
- Brand New Red Aluminium Mushroom Head Push Button Switch; Voltage: 250V, 5A. Hole size required: 0.87''/22mm
- 22mm Momentary Push Button Switch: Push & Hold, ON; Release, OFF, Contact Configuration: 1NO
- Electrical life: 200 thousand times. Mechanical life: 1,000,000 cycles
- Easy to install, screw teminal eliminates welding troubles, you can easily connect the switch to your circuit.
- High quality metal material & IP65 waterproof protection can be used in wet or dusty enviroment.
- Specifications: R13-507, brand new Round Push Button Switch - pack of five.
- Function: The input voltage of this classic round head button switch is 3A 250V AC/6A 125V AC. After pressing and holding the switch, the device immediately enters the working state; after releasing the switch, the device immediately stops running.
- Design: switch is 2pin, single pole single throw design, mounting hole size is 16mm/0.63inch.
- Applicability: Widely used in industrial operations, suitable for refitting vehicles, ships, motorcycles and other traffic equipment; as well as electronic refitting, water dispensers, treadmills, coffee pots and other household appliances.
- Durability: High quality, reliable, shock resistant, up to 500,000 cycles. Easy to clean and maintain, long service life.
- 1.100% Brand New and high quality.
- 2.High precision mechanism design offers perfect operation and long service life.
- 3.Package includes 10 values tact push button switch, total 180PCS.
- 4.10 values: 6*6*4.3,6*6*5,6*6*6,6*6*7,6*6*8,6*6*9.5,6*6*11,6*6*12,6*6*13,7*7mm.
- 5.Great tool for television, audio equipment ,computer, interphone, remote control and other many filed.
Our Winner:
- Package contains 12pcs 7mm Prewired momentary mini push button,6 colours (red, yellow, blue, green, black, white),each colour 2pcs.
- Operation Type: Momentary; Contact Type: SPST; Rating Voltage: 3V-6V-12V-24V-230V/ 1A; 2 Pin, Nomal Open NO/NC.
- Momentary ON/OFF button (button is "on" only when the button is held down).
- Easy Installation: Pre-wired design,Nice soldering,easy to install,save your time to connect wire to the switches.
- The push button is used in industrial controlling circuits for controlling in electromagnetic starter, Contactor, Relay, electrified railway and power grid wire insulation protection.
Current offers for “Push Button”
You want to buy the best products in “Push Button”? In this bestseller list you will find new offers every day. Here you will find a large selection of current products in the category “Push Button”.