Table of Contents
Recommended products regarding the topic “Onboard Air Compressor”
We have compared products in the section “Onboard Air Compressor”. Here you can find the top 15 in the category “Onboard Air Compressor”.
Onboard Air Compressor – the most important at a glance
An onboard air compressor is a powerful tool often mounted to vehicles, enabling users to inflate tires, power tools, and other equipment while on the go. It operates by drawing in air, compressing it, and storing it in a tank for later use. The main factors to consider when choosing an onboard air compressor are pressure (measured in PSI), air delivery (CFM), tank size, and power source (usually gas or electricity). Onboard air compressors vary in performance, with high-end models typically offering better performance in terms of pressure and air delivery capacity. One significant difference between products lies in their power supply; while some compressors are powered by the vehicle’s battery, others require a dedicated power source like a separate gas tank. Furthermore, some onboard air compressors are portable, making them suitable for off-site use, while others are permanently mounted onto the vehicle, providing more power and capacity.
Bestsellers in “Onboard Air Compressor”
A list of bestsellers under the category “Onboard Air Compressor” you can find here. Here you can see which products other users have bought especially often.
- 1-gallon air system kit designed to work with air horns and lockers
- Includes: Air tank, air compressor, omega bracket with mounting hardware, pressure switch (85 PSI on, 105 PSI off), 40-amp relay, 145 PSI safety valve, t-fittings, 1/4-inch drain cock, 1/4-inch compression fitting, 1/4-inch plug, pair of 1/4-inch NPT to 1/8-inch BSP, 20-foot 16-gauge wire with inline fuse holder, accessory airline, and electrical connections
- 1-gallon air tank and 98C compressor combine for plenty of power
- For air horn use, air lockers, and a host of other light duty pneumatic needs
- Reliable air source in a smaller volume and a cost-effective package
- Constructed entirely of lightweight, high strength engineering grade materials
- Quality components for quiet operation and extra long life
- Hard-anodized cylinder bore for reduced friction
- Sealed for moisture and dust resistance
- Heavy duty maxi-fuse equipped for professional in-line circuit protection
- Intended for inflation of tires up to 37 inches. Designed to be installed and mounted onto the vehicle.
- Includes all parts needed for installation of you very own onboard air solution for tire maintenance and small pneumatic tools
- Comes with a VIAIR 450C Air compressor and a 110 to 145 PSI Pressure switch.
- 150 PSI maximum working pressure and 100% duty cycle at 100 PSI
- Can inflate four tires up to 37 inches in diameter. Designed for uninterrupted use for up to an hour (at 72 degrees ambient temperature) One year manufacturer's defect warranty included with copy of the receipt. Please check the manufacturer's website for a wiring diagram.
- 12V COMPRESSOR WITH TANK - This kit includes a 200 PSI compressor and a 1.5 Gallon air tank (5.7 Liter), with a 150PSI pressure switch for long-lasting use and safety
- TANK - Made of precision welded steel and coated with an anti-corrosion coating, this tank is built to withstand the toughest conditions. It includes 6 ports to allow operational flexibility
- AIR COMPRESSOR - This maintenance-free, heavy-duty air horn compressor is set to safely shut off when the air pressure reaches 150PSI, ensuring your horns are ready to blow whenever you need them
- EASY TO INSTALL & MULTIPLE USES - The tank includes brackets for quick and easy installation. It is designed to provide onboard solutions for high-pressure train horns
- ACCESSORY PACK - Includes a pressure gauge, pressure switch, air hose, and mounting hardware
- Designed to actuacte smaller air horns, air lockers and for minor load levelling adjustments. Not intended for tire inflation.
- Includes all parts needed for installation of you very own onboard air solution for air lockers and small air horns. Just connect your air line into our onboard air system.
- 120 PSI maximum working pressure and 25% duty cycle
- Remote mount air filter assembly, sealed compressor, 2.0 gallon air tank, 90 to 120PSI pressure switch and more.
- Can be used to inflate helper bags for load leveling, inflate four tires up to 31 inches in diameter or use with heavy duty air horns.
- 1x Air compressor with air tank, 1x hose, brass fittings, fuse, fuse holder and mounting hardware are included
- Max pressure : 150 PSI; Power input : DC 12V; Tank capacity : 6 Liters / 1.60 Gallons
- The steel tank and aluminum alloy compressor are durable and sturdy for your long-lasting use
- Portable Air Compressor Pump Tire Inflator For Train Horns mototphome Tires
- This onboard air compressor for jeep comes with an all-in-one design, and mounting bracket included for your quick and easy installation, designed for onboard solution for air horns, inflation of tires, air bed, etc.
- High Quality and Durable: Weighs 10.8 lbs, VEVOR air compressor is equipped with 100% ball bearing motor, hard anodized aluminum cylinder and PTFE Teflon piston seal for extra long life, low heat and quiet operation, provides peace of mind for road trips and off-roading.
- Easy Installation: The VEVOR onboard air compressor is compact in size, with a full set of installation accessories, it can be easily installed under the hood of the car and quiet enough to mount in the cab. Tough Tool for every new off-road enthusiast.
- Fast Inflation: Maximum airflow - 3.5 CFM, this off road air compressor with 1 gallon air tank has enough output to air up four 35 in. to 37 in. tires in a single duty cycle and typically air up a 35 in. tire in just over two minutes.
- Wide Compatibility: Adjusting wheel pressure for different off road conditions, Compatibility with air tools, air horns, lockers, inflatable camping accessories, work or play this air compressor does it all.
- Package Includes: Full assembled air compressor; Complete snap together wiring loom; OEM quality compressor isolating switch; Locker supply rated pressure switch; Splash resistant air filter with washable high flow sintered bronze filter cartridge; Mounting hardware with reinforcing backing plate.
- High Quality and Durable: The VEVOR air compressor is built to last, featuring a sturdy construction with a 100% ball bearing motor, hard anodized aluminum cylinder, and PTFE Teflon piston seal. It ensures long life, low heat, and quiet operation, perfect for road trips and off-roading.
- Easy Installation: Compact in size and provided with complete installation accessories, the VEVOR air compressor can be easily installed under the car hood or in the cab. It's a convenient tool for any off-road enthusiast.
- Fast Inflation: With a maximum airflow of 3.5 CFM and a 1-gallon air tank, this compressor can quickly inflate four 35 to 37-inch tires in a single duty cycle. It typically takes just over two minutes to inflate a 35-inch tire.
- Wide Compatibility: The VEVOR air compressor is versatile, allowing you to adjust wheel pressure for different off-road conditions. It works with air tools, air horns, lockers, and inflatable camping accessories, making it suitable for various applications.
- Package Includes: The package comes with a fully assembled air compressor, snap-together wiring loom, compressor isolating switch, pressure switch, splash-resistant air filter with washable bronze filter cartridge, and mounting hardware with backing plate.
- 12V Permanent Magnetic Motor
- Maximum Working Pressure: 200 PSI
- Duty Cycle: 100% @ 100 PSI
- Amperage Draw: 23A
- Flow Rate: 1.7CFM @ 0 PSI
- Intended for inflation of tires up to 33 inch. Designed to be installed and mounted onto the vehicle.
- Includes all parts needed for installation of you very own onboard air solution for tire maintenance and small pneumatic tools, except for air hose.
- Comes with one VIAIR 325C air compressor anda 110 to 145PSI pressure switch.
- 150 PSI maximum working pressure and 33% duty cycle
- Can be used to inflate helper bags for load leveling, inflate four tires up to 31 inches in diameter or use with heavy duty air horns. One year manufacturer's defect warranty included with copy of the receipt. Please check the manufacturer's website for a wiring diagram.
Our Winner:
- 1-gallon air system kit designed to work with air horns and lockers
- Includes: Air tank, air compressor, omega bracket with mounting hardware, pressure switch (85 PSI on, 105 PSI off), 40-amp relay, 145 PSI safety valve, t-fittings, 1/4-inch drain cock, 1/4-inch compression fitting, 1/4-inch plug, pair of 1/4-inch NPT to 1/8-inch BSP, 20-foot 16-gauge wire with inline fuse holder, accessory airline, and electrical connections
- 1-gallon air tank and 98C compressor combine for plenty of power
- For air horn use, air lockers, and a host of other light duty pneumatic needs
- Reliable air source in a smaller volume and a cost-effective package
Current offers for “Onboard Air Compressor”
You want to buy the best products in “Onboard Air Compressor”? In this bestseller list you will find new offers every day. Here you will find a large selection of current products in the category “Onboard Air Compressor”.