Table of Contents
Recommended products regarding the topic “Car Computer Diagnosis”
We have compared products in the section “Car Computer Diagnosis”. Here you can find the top 15 in the category “Car Computer Diagnosis”.
Car Computer Diagnosis – the most important at a glance
Car computer diagnosis, also known as On-Board Diagnostic (OBD) systems, provide vehicle owners and mechanics with detailed data about a car’s performance and issues. These products connect to the car’s computer and can identify problems ranging from emission failures to engine heat, providing a diagnostic trouble code (DTC) for each issue it identifies. Some common products include BlueDriver, Ancel, and Autel which all have similar capabilities but differ in terms of the specific features, cost-effectiveness, and the level of complexity. BlueDriver is highly rated for its advanced features and the ability to provide repair suggestions, while Ancel is favored for its affordability and simple interface. Autel, on the other hand, is lauded for its wide car coverage and the ability to perform multiple functions, albeit at a higher price point. Determining which product to use depends on your proficiency in car mechanics, your specific need, and your budget.
Bestsellers in “Car Computer Diagnosis”
A list of bestsellers under the category “Car Computer Diagnosis” you can find here. Here you can see which products other users have bought especially often.
Bestseller No. 1
FOXWELL NT301 OBD2 Scanner Live Data Professional Mechanic OBDII Diagnostic Code Reader Tool for Check Engine Light
- [Vehicle CEL Doctor] The NT301 obd2 scanner enables you to read DTCs, access to e-missions readiness status, turn off CEL(check engine light) or MIL, reset monitor, read live data and retrieve VIN of your vehicle. The fault code will appear again even though you cleared before, if you don't repair the car completely. The fault code only can be cleared by NT301 after car repair finished, as like all the obd2 scanner's working principle.
- [Read Fault Codes] About the read code funtion needs to be in the ignition on state and if the check engine light is on. If the vehicle is compatible with NT301, please select correct menu & ensure no hardware/wiring issues/obd2 interface damage for accurate results. The correct menu: Select OBDII-> Wait for seconds-> Select Read codes
- [Accuracy & Streams] Live data graphing and logging. Accurately read error codes for most Worldwide cars, SUVs, light trucks and 12V diesels equipped with Obd2. Graphing live vehicle sensors data allows you to focus on any suspicious data and trend. It's a basic code reader and DOESN'T't support to scan ABS, SRS, Transmission systems etc, . It also DOESN'T support ANY special functions like battery registration/ bi-directional control/ SRS Reset/ABS related reset or Program.
- [OBDII Protocols & Compatibility] The NT301 supports OBDII protocols like KWP2000, J1850 VPW, ISO9141, J1850 PWM and CAN. The device is compatible with 1996 US-based, 2000 EU-based and Asian cars, light trucks, SUVs. Kindly check the vehicle compatibility before the purchase since the function comatibility and car compatibility vary from different car models, year and vin.
- [S-mog Check Helper] Read/Erase and I/M readiness hotkeys make it easy to use the car computer reader right out of the package. Red-Yellow-Green Leds and build-in speaker indicate the readiness status for confident e-missions test.
Bestseller No. 2
ANCEL AD410 Enhanced OBD2 Scanner, Vehicle Code Reader for Check Engine Light, Automotive OBD II Scanner Fault Diagnosis, OBDII Scan Tool for All OBDII Cars 1996+, Black/Yellow
- WIDE COMPATIBILITY – Trusted by YouTube Star Scotty Kilmer. The AD410 OBD2 Scanner supports all 16PIN vehicles that comply with the OBDII protocol, including KWP2000, ISO9141, J1850 VPW, J1850 PWM, and CAN. This OBD2 code scanner compatible with 1996 US-based, 2000 EU-based and Asian cars, light trucks, SUVs, as well as newer OBD2 and CAN vehicles. Multilingual support (English, German, French, Spanish, etc.), this car code reader is ideal for international users. Check compatibility with your vehicle model before purchasing. !!! Powered directly from your vehicle's OBDII connector, this diagnostic tool doesn' t need a battery or charger.
- CRITICAL FUNCTIONALITY – Quickly Read & Clear Fault Codes. The obd2 scanner diagnostic tool quickly reads and clears stored emissions-related codes, pending codes, and provides code definitions. With over 42,000 built-in DTC lookups, you can easily identify faults without the need for Google searches. Reset the MIL, check monitor readiness before smog tests, and understand your vehicle's health before costly repairs. !!! Note: Fault codes can be cleared after resolving the underlying issue, the code reader itself does not have a reset function.
- ENHANCED OBDII DIAGNOSTICS – Comprehensive System Testing. This engine obd2 scanner diagnostic tool offers advanced diagnostics, including testing of O2 sensors and EVAP systems. Perform a leak test on your vehicle's EVAP system and monitor the fuel tank's integrity. The O2 sensor test helps fine-tune the air/fuel mixture, improving fuel efficiency and reducing emissions—saving you money at the pump and reducing your car's environmental impact. !!! Note: The AD410 is only an engine code reader, it DOESN'T support other systems such as ABS, SRS, Transmission and others.
- QVGA DISPLAY & NEW UI – User-Friendly Interface. The OBD scanner for car boasts a 2.4 TFT true-color LCD display (262K) for clear, easy-to-read results. With an intuitive UI design, you can quickly access OBDII diagnostics, I/M readiness checks, DTC search, and setup options. No need to read a manual—this user-friendly auto diagnostic code scanner is perfect for beginners, mechanic and seasoned users alike.
- EASY TO USE – Locate the vehicle’s OBD-II port (typically found under the steering wheel, near the dashboard, or inside the fuse box). Insert the 16-pin connector firmly into the port to ensure a secure physical connection. Power on the vehicle (some devices require the engine to be running, while others only need the ignition turned to the ‘ON’ position)—then the item will work. The USB cable is only for updates and is not needed when connected to the vehicle.
Bestseller No. 3
VDIAGTOOL VD10 OBD2 Scanner Code Reader Car Diagnostic Tool Engine Fault Code Reader for Turn Off CEL with Freeze Frame/I/M Readiness for All OBDII Protocol Cars, OBD2 Scanner Diagnostic Tool
- 【A MUST-HAVE TOOL FOR DIYERS】 - VDIAGTOOL VD10 car code reader is an incredibly useful obd scanner for each car owner or hobbyist, even for those with little to no experience when it comes to vehicle mechanics! Similar to a fixd car diagnostic tool, using this car diagnostic scanner is extremely easy. All you have to do is attach it to your car OBDII port and you can diagnose car problems in seconds! Read Codes (DTCs); Clear Codes; Live Data; View Freeze Frame; I/M Readiness; Vehicle Information.
- 【KEEP ENGINE IN GOOD STATUS】 - VDIAGTOOL check engine code reader brings a fast access to scan, read the car fault code, show its definition on the screen instantly, troubleshooting to find the root causes of problems, erase the engine fault code and turn off the MIL (Malfunction Indicator Light). Similar to a fixd car diagnostic tool, this car code reader helps ensure your engine stays in top condition.
- 【READ/CLEAR CODES & DTC LOOKUP】- No search online & saving your time, this vehicle car code reader retrieves generic (P0, P2, P3, and U0), manufacturer specific (P1, P3, and U1) codes, pending codes and displays DTC definitions based on the built-in database(more than 3000 codes) on the TFT screen, find out the root causes and clear the codes after fixed.
- 【LIVE DATA & RETRIEVE FREEZE FRAME】 - This diagnostic scan tool for accurate diagnosis enables you to retrieve data from vehicle sensors, such as Engine RPM, Intake air temperature, Short/Long term fuel, Misfire data and etc. The freeze frame is stored in the PCM together with the diagnostic trouble code (DTC) related to the fault. Comparable to a fixd car diagnostic tool, the VD10 car code reader car scanner can be a valuable & practical diagnostic aid and also greatly help when diagnosing intermittent problems.
- 【I/M READINESS for THE S-nn-0-g CHECK】- OBDII vehicle may not pass the annual inspection unless the required monitors since reset are complete. So you should at least read the readiness monitors and make sure they are ready. This car obd2 scanner diagnostic tool is equipped with I/M readiness function to check the operations of the e-m-issi0n system on OBD2 compliant vehicles, run I/M monitor readiness test, checking if the pass vehicle s-m-0-g inspection.
Bestseller No. 4
WEJOWE OBD2 Scanner Diagnostic Tool, Check Engine Code Reader OBD2 Scanner with Reset, Mode 6, Mode 8 & I/M Readiness, Auto Check Engine Light Car Diagnostic Scan Tool for All OBDII Car Since 1996
- WEJOWE Professional OBD2 Scanner Diagnostic Tool with Powerful Functions:OBD2 scanner code reader feature built-in 35901 OBD2 DTCs lookup library, As professional car scanner, the obd2 scanner diagnostic tool will help you to determine the cause of the engine light,read I/M readiness, Read & clear codes, turn off engine light or MIL, view freeze frame, retrieve vehicle VIN, battery voltage test, live data stream, onboard monitoring mode, and perform component testing etc
- OBD2 Scanner Built-in 35,901 DTC Lookup: The WEJOWE OBD2 scanner car code reader built-in 35,901 DTCs, the old model obd2 scanner diagnostic tool usually only have 3,000-10,000.the OBD2 Scanner of DTC library covers tens of thousands detailed fault code definitions that will quickly determine the fault cause and catch potential problems before they cost you a fortune. Besides, you don't need to google the meaning of each fault code.If you are looking to replace or upgrade an existing car code reader, this code reader is an excellent option.
- OBD2 Diagnostic Scanner Tool Compatible with 98% Vehicles And Multiple Languages: The code reader OBD2 scanner for cars is designed to be compatible with most vehicles manufactured after 1996 US-Based, 2000 EU-Based and Asian cars. If your car has a 16-pin OBD2 port and was produced within the specified timeline, it should be compatible with the code reader and the obd2 scanner diagnostic tool support for 10 languages: English, French, Spanish, German, Chinese, Russian, Italian, Japanese, Portuguese, Dutch, which make it easy to use for people from different countries.
- Car Scanner Diagnostic offers Convenient Data Printing：The code reader for car offers advanced features such as live data and DTC replay combined with printing function, Connect the OBD2 scanner to your computer to easily print fault data, empowering you to prevent random charges at car repair shops and save valuable time and money. Additionally, WEJOWE offer lifetime free upgrades for the device, ensuring you always have access to the latest features and improvements.
- Super Compact & What You Will Get: The OBD2 scanner tool is easy to carrying and storage,With each package, you will receive a canvas storage bag for convenient storage and a Type-C cable to connect to your computer.And Car Scanner Diagnostic offers Convenient Data Printing：The code reader for car offers advanced features such as live data and DTC replay combined with printing function, Connect the OBD2 scanner to your computer to easily print fault data, empowering you to prevent random charges at car repair shops and save valuable time and money.
Bestseller No. 5
OBD2 Scanner Reader Bluetooth Wireless Auto Diagnostic Scan Tool for iOS & Android for Performance Test Bluetooth 5.4 Car Check Engine Car Code Reader, Clear Error Code Live Data Reset Exclusive APP
- 【Comprehensive Performance Testing】V011 OBD2 Scanner provides a complete diagnostic solution, giving you a thorough understanding of your vehicle's condition. It supports a variety of performance tests, support 9 protocols,👍automotive fault clearing，including fast reading of DTCs, access to electronic emission readiness, turning off CEL or MIL, resetting monitors, reading live data and retrieving the vehicle's VIN, freeze frame, sensor data, data streaming, diagnostic reports, onboard monitoring, live data streaming, and more. With these features, you can monitor your car's performance in real time and discover potential problems before they become major issues.
- 【Convenience and Savings for All Users】Designed with user-friendliness in mind, the V011 OBD2 Scanner is perfect for both novices and seasoned car enthusiasts. The intuitive app helps you interpret the check engine light, and suggests possible fixes. This can help you avoid unnecessary trips to the repair shop and prevent you from being overcharged for repairs. The product also includes helpful how-to guides and video tutorials, empowering you to clear the check engine light yourself and save significantly on repair bills.The fault code can only be cleared after the car is repaired. ⚠️ Notice：lf the car is not repaired,the fault code can only be cleared by the computer in the 4s shop.
- 【Intuitive Data Visualization】Understanding car diagnostics has never been easier. The V011 OBD2 Scanner displays detected data in clear, easy-to-read charts. Whether it's engine coolant temperature, engine speed, vehicle speed, or control module voltage, the visual representation helps you quickly grasp your car’s status. Even beginners can compare these readings against normal values to determine if their car needs any repairs.
- 【Broad Compatibility】The newly upgraded V011 OBD2 Scanner supports over 96% of car makes and models, making it one of the most versatile diagnostic tools on the market. It is compatible with a wide range of brands including Toyota, Honda, Chevrolet, Ford, Mercedes-Benz, Jeep, BMW, Porsche, Subaru, Nissan, Cadillac, Volkswagen, and Lexus, covering vehicles from 1996 to the present. This ensures that almost any vehicle owner can benefit from its extensive features. The device also supports multiple languages, including English, German, Spanish, Finnish, French, Italian, Dutch, Portuguese, and Chinese, ensuring accessibility for a global audience.
- 【Advanced Bluetooth 5.4 Connectivity】Say goodbye to the hassle of traditional wired connections. The V011 OBD2 Scanner features an upgraded Bluetooth 5.4 system, providing faster and more reliable connections. This seamless connectivity ensures you can start diagnosing your vehicle without any delays.Tips: 1. The car must be started (power on and ignition), 2. The mobile phone Bluetooth is turned on. Note that Apple phones only need to turn on Bluetooth, do not connect Bluetooth in the phone settings to turn on OBD Home, the APP will automatically connect (this product is only suitable for OBD home)
Bestseller No. 6
Autel OBD2 Scanner MS309 Universal Car Engine Fault Code Reader, Check Engine Light and Emission Monitor Status, OBDII CAN Diagnostic Scan Tool
- ⚠️【Important Tips Before Purchcase】1. Compatible with standard OBD II vehicles from 1996 onward in the US market. ⚠️2. Due to the Safe Gateway (SGW) / FCA AutoAuth security system, this tool cannot access OBDII modules to clear codes for FCA vehicles (including Chrysler, Dodge, Jeep, etc.) manufactured after 2017. ⚠️And vehicle brands equipped with a SGW are not supported either. ⚠️3. Not support TPMS or other service functions. Only the basic OBDII code reader. Functions not universal, please s-end mes-sage via Ama-zon or 📞autelofficial @ outlook . com📞 to check before order.
- 🧡【How to get a PDF User Manual ?】a) Download directly via Am-azon page from Product guides and documents section. b) Mes-sage us directly via Am-azon or 📞autelofficial @ outlook . com📞, we will send you the PDF version within 0-24 hours. ⚠️📢Warm Tips: 1. It does not support the full engine system, or more advanced prameter display, if need, please consider autel MD906 PRO/ MK808BT PRO etc. 2. Autel MS309 does not listed in Autel US distributor's w-eb. It is only listed in Autel HQ w-eb. If need, please con-tact us to get w-eb.
- 🧡【How to Use The Tool?】The MS309 is a plug-and-play tool; it does not require registration. Step 1: With the k~ in the ON position, the engine off. 2. Connect the MS309 OBDII cable to the vehicle's OBDII port. 3. Then, select the on-screen menu to perform the function. 📢Note: Autel MS309 comes with standard OBD II plug, please ensure your vehicle's port is a stardard OBDII (16 Pin) and not loose.
- 🔥【On-Screen DTC Definition, Save Time & Easy To Use】Autel MS309 OBD2 code reader retrives and clears generic(P0, P2, P3 and U0), manufacturer-specific(P1, P3 and U1) and pending codes, and display DTCs(Diagnostic Trouble Codes) meanings under the codes based on the built-in database(1000+ codes). Don't need to spend much time to search meanings on the internet. This advanced plug-and-play MS309 scanner saves you time - a must-have obd2 scanner for each DIY car owner.
- 🔥【Retrieve Freeze Frame Data & Vehicle info】The OBD2 scanner MS309 can retrieve freeze frame data, Vehicle Information such as VIN number, Calibration ID(s), Calibration Verification Nos. (CVNs), etc, which is useful to check whether the ECU matches when you are buying a used car.
Bestseller No. 7
OWMSIC OBD2 Scanner and Battery Tester, Plug & Play Check Engine Light Code Reader, 12V Battery Analyzer for Car Motorcycle, Live Data, Smog Check, 2025 Upgraded Car Computer Reader(No Battery Needed)
- Assistant for Your Car - Instant Engine and Battery Testing: This device integrates engine fault diagnosis and car battery testing, allowing you to easily perform vehicle health checks without needing to purchase two separate devices. It supports code reading and clearing, real-time data stream analysis, and can accurately analyze battery health, lifespan trends, and starting performance. Whether for routine maintenance or emergency checks, it's a high-performance, professional-grade tool at a competitive price.
- Pass Smog Check with Confidence (I/M Readiness): Don't waste time and money on failed inspections. Use the one-click I/M Readiness hotkey to check your vehicle’s emission status before driving to the station. This automotive diagnostic tool verifies if your car is ready for the smog test, making it an essential tool for used car buyers and daily drivers.
- Universal Compatibility for 99% of Vehicles: Supports most gasoline vehicles manufactured in 1996 and later, including mainstream American, European, and Japanese brands. Compatible with common protocols such as ISO9141, KWP2000, J1850, and CAN, automatically recognizing vehicle models without additional settings. Suitable for private cars, fleets, used car appraisals, and auto repair shops.Features a backlit LCD screen that clearly displays definitions, making it the perfect gift for dad or any car owner, regardless of experience.
- Plug & Play, No App Required – Efficient & Easy for Everyone: No application or network connection required, plug and play; high-definition screen displays test results with clear logic and simple operation. Sturdy wiring and ergonomic button design ensure high durability, allowing stable operation even in the high-frequency environment of a repair shop. Whether you're a novice driver or a professional technician, you can quickly complete vehicle inspections, making maintenance more convenient and time-saving.
- Comprehensive Battery Health Test with Detailed Report: It can not only detect battery voltage, but also analyze CCA cold start current, SOH battery health status, SOC charge level, internal resistance, and charge/discharge status, generating detailed reports and predicting whether the battery is about to fail. It can effectively avoid inconvenience and losses caused by low battery, difficulty starting in winter, or sudden breakdowns, making it especially suitable for home users and repair shops.
Bestseller No. 8
Zmoon OBD2 Scanner Diagnostic Tool, Vehicle Check Engine Code Readers with Reset & I/M Readiness & More, Car OBDII/EOBD Diagnostic Scan Tool for All Vehicles After 1996
- Car Diagnostic Scanner with Full OBD/EOBD Function: Read codes and clear codes, 10000+ fault codes available for query, viewe freeze frame, I/M readiness and historical I/M Data, live data stream and live curve (car speed, battery voltage etc), car information reading, oxygen sensor test, EVAP test, calculate load value, engine coolant temperature, get engine speed. It has all the OBD functions you need.
- 2.8'' HD Color Screen: Compared with traditional OBD scanners, Zmoon 2.8'' HD color check engine code reader displays more and richer content, which will not cause eye fatigue after long-term use. And the body design is very suitable for one-handed holding.
- Compatible with Most Vehicles & 7 Languages Available: OBDII/EOBD car scanner diagnostic for all cars after 1996 and newer American/European/Asian cars, supports English, Spanish, French, German, Italian, Russian and Dutch.
- Plug and play: Directly powered by the car, even beginners can quickly master and use the car code reader proficiently. No need to download APP, it is more accurate and stable than the wireless bluetooth code reader! And there are 3 statu lights on the device to remind you if your car is faulty, which is very friendly to beginners.
- 10,000 DTC Lookup: Built-in 10,000 DTCs, the old model obd2 usually only have 3,000 DTC. So the V317 car scanner has a huge advantage, which means that this obd2 scanner can better help diagnose and solve your vehicle faults. This is a great option if you want to replace or upgrade an existing car scanner.
Bestseller No. 9
BLCKTEC 420 Bluetooth OBD2 Scanner Diagnostic Tool - Vehicle Code Reader for Car - Clears Check Engine Light - Comes with Premium OBD App On IOS & Android - Works For All Cars 1996 & Newer
- [Effortless Diagnosis & Repair] - Harness the full potential of the automotive code reader to quickly identify issues with your vehicle. Our advanced OBD2 reader not only reads and erases codes but also provides live data, battery/alternator tests, and detailed code severity levels. It's the ultimate tool for DIYers and mechanics seeking a comprehensive car tester diagnostic for all cars.
- [Top Rated App] - Pair our auto scanner diagnostic code scanner with our exclusive app for comprehensive diagnostics and verified fixes by ASE Certified Technicians, tailored to your vehicle. With our zurich OBD2 code reader, accurately diagnose and efficiently solve issues. Plus, access Maintenance Schedules, Dealer Recalls, Technical Service Bulletins, and RepairPal. This car scanner diagnostic for all cars offers premium features for seamless upkeep, compatible with iOS & Android.
- [Get Free Updates] - Stay ahead with the OBD2 reader, designed for longevity and precision. Benefit from firmware updates that ensure your car tester diagnostic for all car remains at the forefront of vehicle diagnostics technology. Our OBD 2 scanner code reader is the smart choice for professionals and enthusiasts seeking future-proof tools.
- [Unrivaled Compatibility & Language Support] - Our OBDII Scanner sets the standard for versatility, supporting 1996 and newer OBD2 compliant vehicles across brands and regions. Whether you speak English, Spanish, or French, our scanner for car ensures no detail is lost in translation.
- [Designed & Supported in the USA] - Proudly based in Southern California, our OBD reader is the brainchild of local Master Technicians. Experience unmatched customer support and product expertise designed to empower every mechanic. For queries or guidance, our friendly team is just a message away, ensuring you get the most out of your car scanner.
Bestseller No. 10
ZMOON ZM201 Professional OBD2 Scanner Diagnostic Tool, Enhanced Check Engine Code Reader with Reset OBDII/EOBD Car Diagnostic Scan Tools for All Vehicles After 1996, 2026 Upgraded
- [ Wide Vehicle Compatibility ] This OBD2 diagnostic scanner works for all vehicles after 1996 (US-based) / 2002 (EU-based) / 2008 (Asia-based) that have a standard 16PIN OBD2 port. Supports all OBDII protocols including KWP2000, ISO9141, J1850 VPW, J1850 PWM, and CAN. If your car has a check engine light and an OBD2 port, this car code reader is designed to work. Please confirm vehicle compatibility before purchase. ZM201 OBD2 scanner diagnostic tool powered directly from the OBDII port — no battery or charging required.
- [ Essential Engine Diagnostics, Save Time & Cost ] Quickly read and clear engine fault codes, turn off the check engine light (MIL), view I/M readiness before smog tests, and retrieve VIN information. This car code scanner with over 50,000 built-in DTC database, you can understand what’s wrong before visiting a repair shop, helping you avoid unnecessary repairs and costs.The code reader can reset temporary fault codes, but permanent fault codes require repair before they can be reset.
- [ Live Data & Freeze Frame Diagnostics ] Go beyond basic code reading with live data stream (graph view), freeze frame, O2 sensor test, onboard monitoring and EVAP system checks. This engine code reader designed specifically for engine diagnostics only — does NOT support ABS, SRS, transmission or other advanced vehicle systems, making it a clear and reliable choice for engine-related issues.
- [ Clear Color Screen & User-Friendly UI ] This car scanner diagnostic tool features a 2.8-inch color display with adjustable brightness and light/dark modes for easy reading in any environment. Intuitive menu layout, shortcut keys for fast access, and visual vehicle status indicators mean no learning curve — suitable for beginners, DIY car owners, and experienced users alike.
- [ Plug & Play, Results in Seconds ] Simply plug the obd scanner into your vehicle’s OBD2 port (Typically located below the steering wheel/near the instrument panel.), turn the ignition ON, and get diagnostic results within seconds. No app, no setup, no complicated steps. Lifetime software free-updates ensure long-term usability, with optional PC connection for data review and printing (Support Windows XP/7/8/10, but not Mac).
Our Winner:
Winner in comparison
FOXWELL NT301 OBD2 Scanner Live Data Professional Mechanic OBDII Diagnostic Code Reader Tool for Check Engine Light
- [Vehicle CEL Doctor] The NT301 obd2 scanner enables you to read DTCs, access to e-missions readiness status, turn off CEL(check engine light) or MIL, reset monitor, read live data and retrieve VIN of your vehicle. The fault code will appear again even though you cleared before, if you don't repair the car completely. The fault code only can be cleared by NT301 after car repair finished, as like all the obd2 scanner's working principle.
- [Read Fault Codes] About the read code funtion needs to be in the ignition on state and if the check engine light is on. If the vehicle is compatible with NT301, please select correct menu & ensure no hardware/wiring issues/obd2 interface damage for accurate results. The correct menu: Select OBDII-> Wait for seconds-> Select Read codes
- [Accuracy & Streams] Live data graphing and logging. Accurately read error codes for most Worldwide cars, SUVs, light trucks and 12V diesels equipped with Obd2. Graphing live vehicle sensors data allows you to focus on any suspicious data and trend. It's a basic code reader and DOESN'T't support to scan ABS, SRS, Transmission systems etc, . It also DOESN'T support ANY special functions like battery registration/ bi-directional control/ SRS Reset/ABS related reset or Program.
- [OBDII Protocols & Compatibility] The NT301 supports OBDII protocols like KWP2000, J1850 VPW, ISO9141, J1850 PWM and CAN. The device is compatible with 1996 US-based, 2000 EU-based and Asian cars, light trucks, SUVs. Kindly check the vehicle compatibility before the purchase since the function comatibility and car compatibility vary from different car models, year and vin.
- [S-mog Check Helper] Read/Erase and I/M readiness hotkeys make it easy to use the car computer reader right out of the package. Red-Yellow-Green Leds and build-in speaker indicate the readiness status for confident e-missions test.
Current offers for “Car Computer Diagnosis”
You want to buy the best products in “Car Computer Diagnosis”? In this bestseller list you will find new offers every day. Here you will find a large selection of current products in the category “Car Computer Diagnosis”.
No products found.